iFix RT809F - 4.14 PIC 12 F Series SCMs Reading and Writing

4.13.3 Writing Operation
 Refer to 93 chip to save and load writing file.
4.14 PIC 12F Series SCM’s Reading and Writing
4.14.1 Board Number
Board Number : LD40V9-MAC4X，TCL GC32 chip，standby MCU type PIC12F675。PIC12F629,the
same method to read and write.
4.14.2 PIC Series Instruction
MCU of PIC series is widely used in the standby controlling and power management circuits of
FPTV,with many types,low power consumption,high performance.When repairing there are maybe
some problems,like PIC MCU damage because of the too-high 5V power supply voltage(This MCU
will damage when the VDD power supply is over 5.5V),or the IO port of PIC MCU is broken down