Need help?Do you have a question about the IFM Electronic AL1202 and is the answer not in the manual?
General| Communication Protocol | IO-Link |
|---|---|
| Degree of Protection | IP 67 |
| IP Rating | IP67 |
| Operating Temperature | -25 °C to +60 °C |
| IO-Link Revision | 1.1 |
| Output Current Max | 500 mA |
| Output Current | 500 mA |
| Connection Type | M12 |
Details prohibited modifications and the consequences of improper handling of the device.
Covers device communication protocols, configuration methods, and data interpretation.
Guides through the initial setup and network parameter configuration using LR DEVICE.
Sets access rights for parameters and data exchange between Profinet and LR DEVICE.
Details how to set IP addresses, subnet masks, and names for network interfaces.
Configures each IO-Link port for different operational types like digital input/output or IO-Link.
Configures settings for new IO-Link device validation and parameter backup/restore.
Describes the procedure to restore the device to its default factory configuration.
Manually adds and configures IO-Link devices to the device configuration offline.
Guides on integrating the device into a Profinet network using project software.
Sets access rights and communication parameters within the Profinet network.
Assigns Profinet slots to IO-Link ports and configures module parameters.
Sets IP addresses, network masks, and device names for the Profinet interface.
Explains how to retrieve hardware and software status information from the device.
Provides instructions for updating the device's firmware via its web interface.
Details the process for replacing an IO-Link device while preserving its configuration.
To Next Page