4
3 Functions and features
With temperature sensors connected the unit monitors the system temperature in
machinery and plant.
Connectable temperature sensors:
Temperature sensors TS or TT.•
Resistance thermometer RTD (Pt 100 or Pt 1000).•
The unit automatically detects the connected sensor type and configures itself ac-
cordingly The electrical measuring method (3-wire or 4-wire sensor) is determined
viathemenusetting(→9.5.1).
4 Function
4.1 Communication, parameter setting and evaluation
The unit displays the current system temperature.•
It generates 2 output signals according to the parameter setting.•
OUT1 Switching signal for system temperature limit value.
OUT2 Switching signal for system temperature limit value.
It moreover provides the process data via IO-Link.•
The unit is laid out for fully bidirectional communication. So, the following op-•
tions are possible:
Remote display: Reading and displaying the current system temperature. -
Remote parameter setting: Reading and changing current parameter settings -
with the FDT service program ifm Container or via IO-Link.
Using the FDT service program ifm Container, the current parameter settings -
can be stored and transferred to other units of the same type.
The program library of the available DTM objects can be found at www.ifm.com
→Service→Download.
Device-specific parameter lists for IO-Link parameter setting are available at:
www.ifm.com→Selectyourcountry→Datasheetdirect:
To Next Page
Loading...
