IFM CR0452 - 4 Configurations; 4.1 Set up the runtime system

32
ifm Programming Manual BasicDisplay CR0452 v03.02 05 / 2018
Configurations Set up the runtime system
4 Configurations
Set up the runtime system ......................................................................................................................32
Set up the programming system ............................................................................................................35
Function configuration in general ...........................................................................................................40
Variables .................................................................................................................................................41
1016
The device configurations described in the corresponding installation instructions or in the Appendix
(→ p. 188) to this documentation are used for standard devices (stock items). They fulfil the requested
specifications of most applications.
Depending on the customer requirements for series use it is, however, also possible to use other
device configurations, e.g. with respect to the inputs/outputs and analogue channels.
4.1 Set up the runtime system
Reinstall the runtime system ..................................................................................................................33
Update the runtime system.....................................................................................................................34
Verify the installation ..............................................................................................................................34
14091