Need help?Do you have a question about the IFM PQ7834 and is the answer not in the manual?
Explains how the unit displays pressure and generates two output signals based on parameter settings.
Details hysteresis (normally open/closed) and window (normally open/closed) functions for output switching.
Provides step-by-step instructions for securely attaching the unit to a DIN rail.
Details the process of mounting the unit onto a rear panel using screws.
Explains the function of each pin (1-4) for power supply, output 1, and output 2 (diagnostic).
Outlines the three essential steps for setting any parameter: selection, value adjustment, and acknowledgement.
Details how to configure output signals (ou1, ou2) and select switching functions like hysteresis or window.
Guides on setting the upper (SPx/FHx) and lower (rPx/FLx) switching limits for hysteresis and window functions.
Explains how the unit displays pressure and generates two output signals based on parameter settings.
Details hysteresis (normally open/closed) and window (normally open/closed) functions for output switching.
Provides step-by-step instructions for securely attaching the unit to a DIN rail.
Details the process of mounting the unit onto a rear panel using screws.
Explains the function of each pin (1-4) for power supply, output 1, and output 2 (diagnostic).
Outlines the three essential steps for setting any parameter: selection, value adjustment, and acknowledgement.
Details how to configure output signals (ou1, ou2) and select switching functions like hysteresis or window.
Guides on setting the upper (SPx/FHx) and lower (rPx/FLx) switching limits for hysteresis and window functions.
General| Product Category | Pressure Sensors |
|---|---|
| Model Number | PQ7834 |
| Manufacturer | IFM |
| Ambient temperature | -25...80 °C |
| Type | Pressure Sensor |
| Process connection | G1/4" |
| Materials | Stainless steel, EPDM |
To Next Page
