Need help?Do you have a question about the IFM PI2797 and is the answer not in the manual?
Illustrates and explains the wiring for the 2-wire operational mode.
Describes the three-step process for setting any parameter.
How to set the switching function for the outputs (hysteresis, window).
Procedure for calibrating the sensor's zero point.
General| Model | PI2797 |
|---|---|
| Brand | IFM |
| Connection Type | M12 Connector |
| Product type designation | PI2797 |
| Materials (seal) | FKM |
| Product Type | Pressure Sensor |
| Output Type | PNP |
| Protection Rating | IP67 |
| Tightening torque | 25 Nm |
| Housing Material | stainless steel (316L / 1.4404) |
| Materials | stainless steel (316L / 1.4404); FKM |
To Next Page
