Need help?Do you have a question about the IFM PI28 Series and is the answer not in the manual?
General| Manufacturer | IFM |
|---|---|
| Series | PI28 |
| Housing material | PBT |
| Protection class | IP67 |
| Material | PBT |
| Connection Type | Connector |
| Protection Rating | IP67 |
Explains symbols used in the manual for clarity.
Details on product applications and pressure measurement ranges.
Explains 2-wire and 3-wire operating modes.
Configuration of switching functions for outputs in 3-wire operation.
Configuration of analogue output signals for pressure measurement.
Procedure for custom calibration of measured values.
Options for improving sensor protection with accessory covers.
Wiring diagram and core colours for 2-wire connection.
Wiring diagrams for various 3-wire operation configurations.
Structure and explanation of the main menu.
Structure and explanation of the level 2 menu for extended functions.
Structure and explanation of the level 3 menu for simulation.
Step-by-step guide for general parameter setting.
Setting display unit, type, and update rate.
Configuring output signals, including switching limits and analogue scaling.
Optional user settings, zero point calibration, and fault status.
Adjusting delays, logic, damping, and curve calibration for outputs.
Reading min/max values and resetting parameters to factory defaults.
Simulating output states or process values for testing.
Reading currently set parameters from the unit.
Temporarily changing the displayed information during normal operation.
Information on self-diagnostic capabilities and error messages.
Faults related to voltage, output circuits, and parameter settings.
Faults related to measurement range, sensor, and analogue output issues.
Faults related to operating temperature limits and environment.
To Next Page
