Need help?Do you have a question about the IFM PN3 Series and is the answer not in the manual?
General| Product Category | Accessories |
|---|---|
| Series | PN3 |
| Manufacturer | IFM |
| Operating temperature [°C] | -25 - +70 |
| Protection | IP 67 |
Explains document symbols and their meanings for clear understanding.
Details the types of pressure and specific product models.
Describes different operational states and their applications.
Covers data exchange, configuration, and process monitoring.
Explains hysteresis and window functions for output switching.
Details the use of OUT2 for analog signal output (4-20mA, 0-10V).
Covers general info and specific functions available via IO-Link.
Provides wiring diagrams and guidelines for electrical hookup.
Presents the hierarchical menu system for device configuration.
Details parameters found in the first level of the menu.
Details parameters found in the second level of the menu.
Outlines the three-step process for setting any parameter.
Explains how to electronically lock/unlock the device to prevent accidental changes.
Allows selection between operating modes 2 and 3.
Enables setting display units and update rates.
Configures switching and analogue output functions, including hysteresis/window limits.
Covers optional settings like delay times and damping.
Configures display colour based on measured values or output status.
Restores the device to factory default settings.
Allows viewing and clearing of minimum and maximum pressure values.
Explains how to read overload process counts (HIPC/HIPS).
Explains how to view currently configured parameters.
Details how the unit reports internal faults and warnings.
Lists available setting ranges for operating mode 2.
Lists available setting ranges for operating mode 3.
To Next Page
