Need help?Do you have a question about the IFM PI2799 and is the answer not in the manual?
General| Type | Pressure sensor |
|---|---|
| Switching distance | not applicable |
| Connection type | M12 connector |
| Protection class | IP67 |
| Process connection | G 1/4 |
| Materials | Stainless steel |
| Housing material | Stainless steel |
Provides crucial safety information and precautions for installation and use of the sensor.
Describes hysteresis and window functions for configuring switching outputs.
Explains how the analogue output signal can be configured and scaled.
Guides users through calibrating the sensor's measured value curve for accuracy.
Provides the wiring diagram and procedure for connecting the sensor in 2-wire mode.
Details the wiring requirements for IO-Link parameter setting and communication.
Shows wiring diagrams for various 3-wire operation configurations, including switching and analogue outputs.
Provides detailed explanations for each parameter found in the main menu.
Offers comprehensive explanations for all parameters within the level 2 menu.
Details the parameters and settings available for simulation mode.
Outlines the three essential steps for setting any parameter on the device.
Describes the procedure for electronically locking and unlocking parameter settings.
How to configure switching functions (hysteresis, window) for OUT1 and OUT2.
Procedure for restoring all device parameters to their original factory settings.
To Next Page
