IGBT MIG-270 - Page 8

Description for various functions
Item
Note
Over-Heat Alarm
When temperature of the machine is too high, this
indicator will light and machine stop working.
Power Indicator
/
Welding Current Display
While arc is struck (welding) displays actual welding
current.
MIG Welding Voltage Display
While MIG mode display actual welding voltage.
Switch for mode of
MMA/LIFT-TIG/MIG
Three kinds of welding models can be choose when turn to
different position.
Welding Wire Inching
It can let welding wire reach contact tips in fast speed.
MMA Welding Current Adjustment
While MMA mode can adjust welding current from small to
big
MIG Burnback Function
It can remove small ball after stopping welding
MIG Voltage Adjustment
While MIG mode can adjust voltage from low to high.
MIG Wire Speed Adjustment
stepless adjusment from slow to fast.
Polarity Conversion Cable
Connector
When gas welding (solid wire),install this into Positive
Polarity Connector (+)
When gasless welding (Flux wire),install this into Negative
Polarity Connector(-)
Positive Polarity Connector (+)
/
Negative Polarity Connector(-)
/
MIG Welding Torch
Integrated MIG TORCH or Binzel MIG Torch
Power Switch for ON/OFF
Gas Hose Inlet Connector
When use gas welding (solid welding wire), install gas
hose into this connector.
Power Cable with Plug
/
Ground Nut
/
built-in cooling fan and ventilation
/