To Next PageTo Next Page
Need help?Do you have a question about the IGBT CO2 and is the answer not in the manual?
Defines safety terms like Danger and Note for user operations.
Precautions for proper and safe use of the welder to prevent injuries and damage.
Safety guidelines for handling and disposing of the welder at end-of-life.
Describes the welder's model code format and its components.
Details the technical specifications for different welder models.
Provides the physical dimensions and gross weight of the welder and accessories.
Lists and describes the welder's system components and configuration details.
Explains key system features such as duty cycle and characteristics.
Covers environmental, space, transportation, and unpacking requirements.
Specifies power supply needs and guides cable bundle preparation.
Details safety and procedures for electrical connections.
Covers safety measures, welding conditions, and post-welding tasks.
Describes the control panel structure, buttons, knobs, and wire feeder remote.
Covers Gas Shielded, Spot, Synergic/Manual welding, and Arc Dynamic.
Explains how to save, load, and lock welding parameters.
Details internal menu, factory settings, electrode use, and robot connectivity.
Provides a checklist for daily inspection of welder components and cables.
Outlines a plan for regular inspection, cleaning, and testing of the welder.
Covers fault indicators, error codes, solutions, and rectifying process issues.
Details warranty information, repair procedures, and customer service contact.
General| Technology | IGBT Inverter |
|---|---|
| Efficiency | 85% |
| Welding Type | MIG/MAG |
| Duty Cycle | 60% |
| Wire Diameter | 0.8mm/1.0mm/1.2mm |
| Cooling Method | Forced air cooling |
