Note
!
●
Fix the casters to prevent the welder from sliding.
●
To prevent electromagnetic hazards, implement electromagnetic shielding for cables and
welding sites.
●
The slope of the surface must be less than 15 degrees to prevent the welder from falling down.
●
The protection class of the welder is IP23S and is applicable in the following conditions:
Operating temperature range: -10°C- +40°C
Transportation and storage temperature range: -40°C - +70°C
Operating humidity range: ≤ 75% RH at 40°C; ≤ 95% RH at 20°C
Altitude: ≤ 2000 m
The operating environment must not have significant mechanical vibration or mechanical impact.
The welder must not be tilted more than 15°.
The content of dust, metal dust, and corrosive gas must not exceed the normal level.
Avoid the welder from rain and prevent the fan from taking in rain.
Scrapping Precautions
Pay attention to the following when scrap the welder:
● The electrolytic capacitors on the main circuit and the PCB may explode when getting burnt.
● Toxic gases may be emitted when plastic parts such as the front panel are burnt.
● Dispose the welder as industrial waste.
To Next Page
Loading...
