27
The Sensor Test Function
The sensor comms test function is a diagnostic check which provides information regarding
the ability of the Tocsin 750 controller to communicate to all its connected detectors.
To run the test, select the range of channels you wish to test and then how many
communication cycles to run the test for (typically 1000).
When sensor test is selected the following diagnostic screen is displayed.
The display shows eight sensor channels at a time. Use the NEXT and PREVIOUS keys to
display more channels. The return key ends the diagnostic.
Select the starting channel
Select the Finishing Channel
Select how many communication
cycles to run the test for.
To Next Page
Loading...
