iGenix IG3095 - OPERATING INSTRUCTIONS; Clock Setting; Kitchen Timer; Microwave Cooking

11
OPERATING INSTRUCTIONS
This microwave oven uses modern electronic control to adjust cooking
parameters to meet your needs for better cooking.
1. Clock Setting
When the microwave oven is turned on, the oven will display “00:00” and the
Buzzer will ring once.
1) Press “Kitchen Assistant” once, the screen displays “AS-1”.
2) Press “Conrm/+30s/Start” to enter Clock setting mode, “00:00” will
display and the hour gure will ash.
3) Turn “Dial” to adjust the hour gures, the input time should be within
0--23(24-hour).
4) Press “Kitchen Assistant”, the minute gures will ash.
5) Turn “Dial” to adjust the minute gures, the input time should be within
0--59.
6) Press “Kitchen Assistant” to nish clock setting.
Note: After step 5, if “Kitchen Assistant” is not pressed within 5 minutes of
setting the time then the display will revert to previous display shown.
2. Kitchen Timer
1) Press “Kitchen Assistant” twice, the screen displays “AS-2”.
2) Press “Conrm/+30s/Start” to enter Kitchen timer setting mode, “00:00”
will display.
2) Turn “Dial” to set the kitchen timer (The maximum cooking time is
95 minutes).
3) Press “Conrm/+30s/Start” to conrm setting.
4) When the kitchen time is reached, the buzzer will ring 5 times.
Note: If the clock has been set, then once the timer is complete the display will
revert to show the current time.
3. Microwave Cooking
This option uses the microwave function only; there are 5 power levels for users
to choose from when cooking.
1) Press “Optional Function” once and “P100” will ash on the display.
2) Press “Conrm/+30s/Start” to conrm the function, “P100” will display.
3) Press “Optional Function” repeatedly or turn “Dial” to change microwave
power levels from “P100” through to “P10”.