What to do if my iGenix IG9010 Heater does not work?
If your iGenix Heater isn't working, here are a few things to check: * First, ensure it's firmly plugged into the mains wall socket. * Next, verify that the heater is switched on. * Finally, check the fuse or breaker to make sure there is electricity in the mains wall socket.
Why is my iGenix IG9010 getting too hot?
If your iGenix Heater is getting too hot, consider the following: 1. Ensure adequate air flow in the room. 2. Adjust the heat settings to a lower level. 3. Check that all vents are clear and free from any obstructions.
How to fix an iGenix IG9010 Heater that is not heating up?
If your iGenix Heater is not heating up, try this: * Adjust the thermostat to a higher temperature. * Turn the selector control to the higher 2kW setting.
General| Power | 2000W |
|---|---|
| Thermostat | Adjustable |
| Overheat Protection | Yes |
| Tip-over Switch | Yes |
| Type | Fan Heater |
| Cool air setting | No |
| Heat Settings | 2 |
To Next Page
