ENGLISH
6
CONTROLS AND INDICATOR LIGHTS
• Standby Mode: Red rings around power and "ICE OUT" buttons indicates Standby
Mode. When you rst plug in your ice maker, it will be in Standby Mode.
• "ON/OFF" Button: Press the "ON/OFF" Button once to turn on your ice maker.
Once you turn your ice maker on, the rings around the "ON/OFF" Button
will be blue and "ICE OUT" button will be red. To put your ice maker back
into Standby Mode, hold down the "ON/OFF" Button for 3 seconds.
• "ICE OUT" button: Press the "ICE OUT" button and hold to dispense ice.
• Ice Full: An infrared sensor in the ice basket helps detect when it is full of ice. When
the "ice full" indicator light is on, it means that ice has lled the ice basket. To restart
production, empty ice from the basket, and the machine will restart automatically.
• Add Water: When the "Add Water" indicator lights on, the machine will
stop making ice. Remove the water tank, add more water, replace the water
tank, and press the "ON/OFF" Button once to restart ice production.
• Auto Clean Mode: When the ring around the "ON/OFF" Button is purple and
the ring around the "ICE OUT" button is red, the machine is in Auto Clean
Mode. See below for instruction on how to use auto clean mode.
HOW TO OPERATE
BEFORE FIRST USE
1. Remove all interior and exterior packaging. If any part or accessory
is missing, please call our customer service department.
2. Follow the steps under CLEANING & MAINTENANCE before using this unit.
3. Place the unit on a at, level surface in a location that is protected from
direct sunlight and other sources of heat (i.e. stove, furnace, radiator). Ensure
there is at least six inches of empty space on all sides of the unit.
4. Allow one hour for the refrigerant uid to settle before plugging
the cord into an electrical outlet for the rst time.
"ON/OFF" Button
"ICE OUT" Button
"Ice Full"
"Add Water"
To Next Page
Loading...
