Igloo SAMOS DEEP Series - 4 Prepare for Line Assembly 3; Remove the Fans 3; Remove the Louvre 3; Remove the Ventilation Grilles 3

3
SAMOS DEEP LINE ASSEMBLY INSTRUCTIONS
IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl
en
PREPARE FOR LINE ASSEMBLY
Unpack the shelves, screens and worktops
Remove the fans
Remove the louvre
Remove the ventilation grilles
• Place the counters in line according to the nal conguration leaving at least 20 cm gap between them.
• Remove all subassemblies from the inside such as lamps, glass sides, shelves, etc.
• Remove the feet slightly raising the counter at the front side, remove the base board, and screw in the feet
again. Remove the rear base board in the same way.
LINE ASSEMBLY INSTRUCTIONS REVISION
PAGE: 3/10TYPE: SAMOS DEEP NO. DATE NO. DATE
DOCUMENTATION NO.: A D
NO: 4,4.1,4.2,4.3,4.4 B E
DATE of 1st issue:
26.05.2019
C F
4
4.1
4.3
4.2
4.4