Igloo SAMOS DEEP Series - Apply Adhesive on the Profile 7; Install the Profile on the Granite Worktop 7; Remove the Film from the Two-Sided Profile of Night Covers 7; Seal the Worktops 7

7
SAMOS DEEP LINE ASSEMBLY INSTRUCTIONS
IGLOO Stary Wiśnicz 289, 32-720 Nowy Wiśnicz, Tel. 14 662 19 10 / Fax: 14 662 19 12 info@igloo.pl / www.igloo.pl
en
LINE ASSEMBLY INSTRUCTIONS REVISION
PAGE: 7/10TYPE: SAMOS DEEP NO. DATE NO. DATE
DOCUMENTATION NO.: A D
NO: 14.3, 14.4, 14.5, 14.6 B E
DATE of 1st issue:
26.05.2019
C F
Seal the worktops
14.3
Apply adhesive on the prole
14.5
Install the prole on the granite worktop
14.6
Remove the lm from the two-sided prole
of night covers
14.4