32
Tamper Alarm
N.A.
Intrusion Alarm
N.A.
Obstruction
Alarm
N.A.
Emergency
Jumpstart
1. Hold the 9V battery against the jumpstart contact points.
2. The lock will sound o a series of beeps and the keypad will light up.
3. Maintaining the same position with the battery and lock’s contact points,
enter a valid PIN code, followed by to unlock.
Decoy PIN Code
1. Key in up to 8 random digits before your actual PIN code, followed by to
unlock.
Privacy Mode
1. Hold the multi-function button on your lock for 3 seconds while it is in ‘locked’
state i.e. bolt tongue is extended.
Quiet Unlock
To mute audio indicators when unlocking:
1. Tap before entering your PIN code / scanning your RIFD credential / using
your fingerprint.
You will have to perform the same step every time you wish to activate Quiet Unlock.
You will not be able to mute audio indicators if this is performed when the lock is in
‘unlocked’ state i.e. bolt tongue is retracted.
Volume Control
To configure the volume of your lock:
*Please ensure you are within Bluetooth range of the lock and your Bluetooth func-
tion is turned on.
1. On your igloohome app, tap on .
2. Select [Volume].
3. Select the volume level from 0 to 5 (softest to loudest).
4. Tap [Apply].
To Next Page
Loading...
