10 www.iGOelectric.com
DISPLAY & FUNCTIONS
SETTINGS MENU
By holding the ‘SET’ button for 3 seconds you will enter the Settings Menu.
The Settings Menu will allow you to change certain features of your ebike.
Once in the Settings menu the word ‘SET’ will begin to ash, pressing the ‘SET’
button will allow you to switch between the different settings. The ‘PLUS’ and
‘MINUS’ buttons will allow you to change the values of those settings.
Holding the ‘SET’ button again for 2 seconds will conrm the settings
to exit the Settings Menu.
Set 1: Reseting the Trip Odometer
Tap the ‘ MINUS’ button once to reset the Trip Odometer to ‘0’
Set 2: No Function
Set 3: Setting the Tire-Size
Having the correct tire-size set into the system is very important. It will
ensure that the data being displayed on the screen is accurate.
On the side of every tire you can nd the tire-size.
Default Tire-Size of your ebike:
28 inch - 40-622 - Circumference: 2205 mm
Set 4: Choosing km/h or mph
Depending on your location, you will want to have the information
on the screen displayed in the proper unit.
Pressing the ‘PLUS’ or ‘MINUS’ buttons while in this mode will allow you to
switch between having the information displayed in kilometers or miles.
To Next Page
Loading...
