22 www.iGOelectric.com
ADJUSTING YOUR ERGOFIT EBIKE
ADJUSTING YOUR SEAT HEIGHT
Your seat height should be adjusted properly to ensure you get the most
comfortable ride possible. The seat height is properly adjusted when your knee has
a slight bend when sitting on the saddle with your foot on the pedal at its lowest
position (gure 22.1). The seat height can be adjusted by loosening the lever on
the seat tube clamp gure 22.2. Make sure to retighten after adjustment.
Fig. 22.2Fig. 22.1
ATTENTION! Ensure that the safety marks for max. height written
on the seat post are not visible when retightening the hex bolt.
ATTENTION! If you can put your feet at on the
ground while seated, your seat height is too low.
ADJUSTING YOUR SADDLE POSITION
You can tilt the saddle to change the seating angle, as well as, slide it backward or forward
(gure 23.3). To adjust the saddle, loosen the nut located on the underside of the saddle
with a wrench (gure 23.4). You will be able to move the saddle around to suit your
preferred riding style. When you are done adjusting, make sure to retighten the nut.
To Next Page
Loading...
