iHerz iCare - Setting Date and Time

13
EN
mmHg Measurement Unit of the blood
pressure
Low battery Batteries are low and need to be
replaced
Irregular heart-
beat
Blood pressure monitor is detect-
ing an irregular heartbeat during
measurement.
Blood pressure
level indicator
Indicate the blood pressure level
Current Time Year/Month/Day, Hour/Minute
Heartbeat Blood pressure monitor is detect-
ing a heartbeat during measure-
ment.
User 1, User 2 Start measurement for User 1,
User 2
Setting the Date and Time
It is important to set the clock before using your blood pressure monitor,
so that a time stamp can be assigned to each record that is stored in the
memory. (The setting range of the year :2014—2054 time format:12 H/24H)
1. When the monitor is o󰀨, hold pressing “SET” for 3 seconds to enter the
mode for year setting. Or when the monitor is o󰀨, press “SET” button
shortly, it will display the time. Then hold pressing “SET” button to enter
the mode for year setting.
2. Press the “MEM” to change the [YEAR]. Each press will increase the
numeral by one in a cycling manner.
3. When you get the right year, press “SET” to set down and turn to next
step.Repeat steps 2 and 3 to set the [MONTH] and [DAY].