20
Using wet cloths to remove dirt
Do not attempt to clean the reusable
cu with water and never immerse the
cu in water.
Disinfection: If required (for example, in a hospital setting), disinfection of
the pressure cu twice per week is recommended.
Disinfect the interior of the pressure cu (the surfaces that come into con-
tact with the patient’s skin) with the use of a soft cloth soaked in ethyl
alcohol (75-90%) and wait for the pressure cu to dry up.
Cleaning of the pressure cu after 200 uses is recommended.
Periodic calibration of device: the accuracy of measurement instru-
ments must be veried from time to time. For this reason, verication of
the indication of statistical pressure periodically (once a year) and after
technical maintenance and repair is recommended. More information can
be obtained from the service center.
SYMBOL INFORMATION
SYMBOL REFERENT
Consult instruction for use
Manufacturer
Manufacturing date
To Next Page
Loading...