Need help?Do you have a question about the iHome AUTO VAC ECLIPSE PRO iHRV11 and is the answer not in the manual?
General| Model | iHRV11 |
|---|---|
| Category | Vacuum Cleaner |
| Dustbin Capacity | 600 ml |
| Battery Type | Lithium-Ion |
| Battery Voltage | 14.4V |
| Charging Time | 4-5 hours |
| Runtime | 120 minutes |
| Noise Level | 65 dB |
| Wi-Fi Connectivity | Yes |
| Scheduling | Yes |
| Auto Recharge | Yes |
| Virtual Wall Barrier | Yes |
| Drop Sensing Technology | Yes |
| Filter Type | High Efficiency Filter |
| Features | Auto recharge, virtual wall barrier, drop sensing technology |
Details compliance with FCC rules, including conditions for operation and limits for digital devices.
Describes the different light patterns of the power and home buttons indicating operational status.
Explains the Wi-Fi indicator light status for network connectivity and configuration.
Details the indicator lights for the dust bag status, including fullness and installation.
Describes the indicator lights related to the robot's charging status.
Explains the indicator lights for the dust collection process and potential errors.
Describes the function and recommended placement of the Auto Empty Base for optimal performance.
Step-by-step guide to assemble and place the parking plate for the Auto Empty Base.
Instructions on powering on the Eclipse Pro by holding the power button until the indicator turns blue.
Instructions on pairing and charging the Eclipse Pro by docking it to the Auto Empty Base.
Overview of the Autovac's automated cleaning functionality and app integration.
Guide on downloading the app from app stores and initial setup requirements.
Steps to initiate the Autovac's first cleaning cycle and ensure proper return to the base.
Explanation of the various cleaning modes like Auto Clean, Powermop Scrub, Manual, and Spot Clean.
Details on using the remote for manual navigation and spot cleaning.
Instructions for using buttons like Start/Pause, Mute, and Suction Power Adjustment.
Information on returning the robot to charge and activating special cleaning functions.
Steps for securing the mop pad and attaching the mop unit to the dustbin.
Step-by-step instructions for accessing, cleaning, and reinstalling the main brush.
Recommended frequency for routine maintenance of the robot's parts.
Procedures for cleaning the dustbin, primary filter, and HEPA filter.
Guidance on washing and maintaining the reusable mop pad.
Procedure for removing, cleaning, and reinstalling the side brush using a screwdriver.
Steps for removing and replacing the dust bag in the Auto Empty Base.
Instructions for cleaning the dust duct to resolve emptying issues.
Solutions for problems related to powering on or starting cleaning cycles.
Troubleshooting steps for issues with returning to the Auto Empty Base.
Solutions for problems affecting cleaning ability, noise, or abnormal behavior.
Troubleshooting for Wi-Fi connection, charging, and scheduled cleaning tasks.
Solutions for fan errors or overheating indicated by a flashing red light on the base.
Solutions for problems related to dust bag installation or proper fit.
To Next Page
