iHome AUTO VAC ECLIPSE PRO iHRV11 - Setting Up The Autovac; Step 1; Step 2

Position the Eclipse Pro on the  oor near your Auto Empty Base. To turn on Press and Hold
the Power button until the indicator turns blue.
Press the Home button to pair Eclipse Pro to your Auto Empty Base. Eclipse Pro will navigate
and dock to the base for charging. Allow Eclipse Pro to fully charge (up to 5 hours) before
 rst use. The indicators on your robot will turn solid green when fully charged.
STEP 1
STEP 2
NOTE: Dust collection may activate during initial docking. Do not be
alarmed. Dust collection frequency can be adjusted later in the iHome
Clean App.
the Power button until the indicator turns blue.
11SETTING UP THE AUTOVAC