iHome POWERCLOCK iBT235 - Time and Alarm Configuration; Setting the Clock Time; DST Switch Functionality; Alarm Setting Procedures

SETTING THE TIME
1. Press and hold the Time Set Button located on the back of the unit
for 2 seconds until the clock display flashes and a beep sounds.
2. Pr
ess the – or + Buttons to adjust the clock to the curr
ent time (hold
f
or rapid setting). Make sure you set the correct AM/PM time. T
he PM
indicat
or appears to the left of the display; there is no AM indicator
.
3.
To toggle the clock display between standard 12 hour time and 24
hour
(“military”) time displa
y, press the Alarm or Alarm Button while
the display is flashing during time setting.
4.
Press and release the Time Set Button to confirm the current time
setting. The YEAR will flash on the display. Press the – or + Buttons
to set the correct year.
5.
Press and release the Time Set Button to confirm the current year
setting. The Date will flash on the display. Press the – or + Buttons to
set the correct month and day(hold for rapid adjustment).
6.
Press and release the Time Set Button to confirm the current date
setting. 2 beeps will sound to indicate time setting mode is complete.
DST SWITCH: This unit has a DST switch on the back of the unit to adjust
the time for daylight saving time and standard time. By default, it is set to
Auto and will automatically adjust the time at the start and end of
daylight saving time. If you wish to adjust manually, slide the switch to +1
to add one hour or to –1 to subtract an hour.
SETTING THE ALARMS
This unit features dual alarms which can be set to dierent times and alarm
sources. Each is set in the same way. Instructions are given as ‘Alarm Button’
- pr
ess Alarm 1 or Alarm 2 to set respective alarms.
1. Pr
ess and hold the Alarm Button for 2 sec
onds until the alarm time
displa
y and alarm ic
on flash.
2. Pr
ess the – or + Buttons to adjust the alarm time (hold for r
apid
setting). Mak
e sure you set the correct AM/PM alarm time. T
he PM
indicator appears to the left of the time display. (There is no AM
indicat
or.)
3. Pr
ess the Alarm Button to confirm the alarm time setting. Press the –
or
+ Butt
ons to set the desired alarm schedule: 7 Days (every day), 5 Days
(week days only) or 2 Days (weekends only).
Continued on next page...