Iiyama ProLite E2482HS User Manual

ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
Ensurethatboththecomputerandthemonitorareswitchedo󰀨.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE

The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamao󰀩ce.

For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyamao󰀩ceforasuitableadaptor.

Makesureyoutightenthengerscrewsateachendofthesignalcable.

The Class I pluggable equipment Type A must be connected to protective earth.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
* VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the VGA input.
CONNECTING YOUR MONITOR : ProLite B2482HS
DVI-D Cable (Accessory)
Power Cable (Accessory)
Audio Cable (Accessory)
HDMI Cable (Not included)
Computer
VGA Cable (Not included)*
AV Equipment etc.
[ Collect Cables ]
Put the cables through the Cable Hole to bundle
them.

Iiyama ProLite E2482HS Specifications

General

Brand	Iiyama
Model	ProLite E2482HS
Category	Monitor
Language	English