Iiyama ProLite E2482HS - Trouble Shooting

ENGLISH
TROUBLE SHOOTING 31
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2.ConsultthefollowingitemsifyoucannotndanappropriateadjustmentiteminOPERATINGTHE
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further
assistance.
Problem Check
(Powerindicator
isorange.)
The screen is not
synchronized.
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
(Powerindicator
isblue.)
The picture does
not appear.
(Powerindicator
doesnotlightup.)
The screen
position is not in
the center.
The screen is too
bright or too dark.

ThePowerCableisrmlyseatedinthesocket.

The Power Switch is turned ON.

The AC socket is live. Please check with another piece of equipment.

If the blank screen saver is in active mode, touch the keyboard or the
mouse.

Increase the Contrast and/or Brightness.

The computer is ON.

The Signal Cable is properly connected.

Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.

If the monitor is in power management mode, touch the keyboard or the
mouse.

The computer is ON.

The Signal Cable is properly connected.

Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.

The Signal Cable is properly connected.

Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.

The videooutput levelof thecomputer iswithin thespecication ofthe
monitor.

Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.

The videooutput levelof thecomputer iswithin thespecication ofthe
monitor.