EasyManuals Logo

Iiyama ProLite TE8612MIS User Manual

Iiyama ProLite TE8612MIS
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
ENGLISH
4 FOR YOUR SAFETY
USAGE CONFIRMATION
The display is compatible for usage in Landscape applications.
IMAGE PERSISTENCE / IMAGE STICKING
Please be aware that all LCD screens can experience Image Persistence or Image Sticking. This
occurs when a residual image remains visible on a screen when static images are displayed for long
periods of time. LCD Image Persistence is not permanent but constant images being displayed for a
long period of time should be avoided.
To counteract Image Persistence, turn off the monitor for as long as the previous image was
displayed, so if an image was on the monitor for 1 hour and there is evidence of a residual or “ghost”
image,youshouldturno󰀨themonitorfor1hourinordertocleartheresidualimage.
For all LFD products, iiyama recommends displaying moving images and utilising a moving screen
saveratregularintervalswheneverthescreenisidle.Youcouldalsoturno󰀨themonitorwhennot
in use to assist the prevention.
OtherwaystoreducetheriskofImagePersistencewillbetoutilisetheFAN-onfunction(if
available),LowBacklightandLowBrightnesssettings.
FOR EXTENDED USE AS A PUBLIC DISPLAY

Image Sticking on LCD Panel
When a static image is displayed for hours, an electric charge trace remains near the electrode
insidetheLCDproducinga“ghost”image.(ImagePersistence).
Image Persistence is not a permanent feature.

Recommendations
To prevent Image Sticking and promote longer life expectancy of display, we recommend the
following:
1. Avoid static images displayed for long periods – change static images on continuous loop.
2.Turno󰀨monitorwhennotinuse,eitherbyremotecontroloruseStandbyorSchedulefunctions.
3. Check the Monitor Menu Settings for "Pixel Shift" etc. and activate it when available. This will
reducetheImageStickingE󰀨ect.
4.Whenmonitorisinstalledinhighambienttemperatureenvironment(s)orinanenclosedposition,
utilise the Cooling Fan, Screen Saver and Low Brightness functions.
5. Suitable ventilation for any monitor is an expectation of any installation – climate control systems
may need to be employed.
6. We strongly recommend utilisation of active cooling with fans for long operation times or high
ambient temperature environments.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Iiyama ProLite TE8612MIS and is the answer not in the manual?

Iiyama ProLite TE8612MIS Specifications

General IconGeneral
Haze rate28 %
Panel life50000 h
Pixel pitch0.4935 x 0.4935 mm
Response time8 ms
Display diagonal86 \
Surface hardness7H
Display brightness400 cd/m²
Display technologyLED
Number of displays1
Native aspect ratio16:9
Horizontal scan range30 - 135 kHz
LED backlighting typeDirect-LED
Touchscreen technologyInfrared
Display number of colors1.073 billion colors
Display diagonal (metric)217.4 cm
Active display area (W x H)1895 x 1066 mm
Number of simultaneous touchpoints40
OrientationHorizontal
Product colorBlack
Product designDigital signage flat panel
Bezel width (side)16.5 mm
Placement supportedIndoor
Bezel width (bottom)31 mm
Positioning accuracy1.5 mm
Panel mounting interface800 x 600 mm
Bluetooth version5.0
Power supply typeInternal
Internal memory32 GB
Processor cores4
Internal storage capacity4 GB
Operating system installedAndroid 11
On-board graphics card modelARM Mali-G52
DVI port-
USB version2.0/3.2 Gen 1 (3.1 Gen 1)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
USB connector typeUSB Type-C
USB ports quantity6
HDMI input ports quantity3
Ethernet LAN (RJ-45) ports2
RMS rated power32 W
PurposeCommercial
HDCP version2.2
Number of OSD languages9
Operating hours (hours/days)16/7
On Screen Display (OSD) languagesCZE, DEU, DUT, ENG, ESP, FRE, ITA, POL, RUS
Sustainability certificatesRoHS, WEEE
Cables includedAC, HDMI, USB
Base materialMetal
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (off)0.3 W
Power consumption (standby)0.5 W
Power consumption (typical)215 W
Package depth225 mm
Package width2110 mm
Package height1283 mm
Package weight75900 g
Weight and Dimensions IconWeight and Dimensions
Display depth100 mm
Display width1957 mm
Display height1160 mm
Display weight58600 g

Related product manuals