AmpliTube X-DRIVE
15
• COMP SENSITIVITY: sets the sensitivity of the compressor.
From 0 to 10.
• COMP OUT: sets the output level of the compressor.
From 0 to 10.
• CAB SIM: selects the cabinet simulator.
CAB 1, CAB 2, CAB 3, CAB 4, BASS, OFF.
• MIX: regulates the amount of the dry and wet distorted signal. By default, the mix is set to 100% WET.
From 0% to 100%.
• X-MODE: the X-MODE boosts the output signal to achieve more volume in certain parts during the performance.
ON or OFF.
N.B. If you also want the Cab Sim when the pedal is bypassed, the BUFFER BYPASS MODE is required.
METAL Control Changes
Parameter Control Change # Values
DRIVE 21 0 – 127
BASS 22 0 – 127
MID 23 0 – 127
TREBLE 24 0 – 127
VOLUME 25 0 - 127
PUNCH 46 0 - 127
COLOR 47 0 - 127
COLOR FREQ 48 0 - 127
PRESENCE 49 0 - 127
MID Q 50 0 - 127
MID FREQ 51 0 - 127
EQ POSITION 52 0 - 127
NOISE GATE 53 0 - 127
NG THRESHOLD 54 0 - 127
NG RELEASE 55 0 - 127
NG DEPTH 56 0 - 127
COMPRESSOR 57 0 - 127
COMP SENSITIVITY 58 0 - 127
COMP OUT 59 0 - 127
CAB SIM 60 0 - 127
MIX 61 0 - 127
X-MODE 13 0 - 127
When a parameter range is not linear its values are equally divided among the 128 steps of a Control Change value.
To Next Page
Loading...
