AmpliTube X-DRIVE
37
• X-MODE: the X-MODE boosts the output signal to achieve more volume in certain parts during the
performance.
ON or OFF.
N.B. If you also want the Cab Sim when the pedal is bypassed, the BUFFER BYPASS MODE is required.
OCTOFUZZ Control Changes
Parameter Control Change # Values
DRIVE 21 0 – 127
BASS 22 0 – 127
MID 23 0 – 127
TREBLE 24 0 – 127
VOLUME 25 0 - 127
MID Q 46 0 - 127
MID FREQ 47 0 - 127
EQ POSITION 48 0 - 127
NOISE GATE 49 0 - 127
NG THRESHOLD 50 0 - 127
NG RELEASE 51 0 - 127
NG DEPTH 52 0 - 127
COMPRESSOR 53 0 - 127
COMP SENSITIVITY 54 0 - 127
COMP OUT 55 0 - 127
CAB SIM 56 0 - 127
MIX 57 0 - 127
X-MODE 13 0 - 127
When a parameter range is not linear its values are equally divided among the 128 steps of a Control Change
value.
To Next Page
Loading...
Need help?
General
