AmpliTube X-DRIVE
41
• X-MODE: the X-MODE boosts the output signal to achieve more volume in certain parts during the
performance.
ON or OFF.
N.B. If you also want the Cab Sim when the pedal is bypassed, the BUFFER BYPASS MODE is required.
FUZZACE Control Changes
Parameter Control Change # Values
DRIVE 21 0 – 127
BASS 22 0 – 127
MID 23 0 – 127
TREBLE 24 0 – 127
VOLUME 25 0 - 127
BIAS 46 0 - 127
MID Q 47 0 - 127
MID FREQ 48 0 - 127
EQ POSITION 49 0 - 127
NOISE GATE 50 0 - 127
NG THRESHOLD 51 0 - 127
NG RELEASE 52 0 - 127
NG DEPTH 53 0 - 127
COMPRESSOR 54 0 - 127
COMP SENSITIVITY 55 0 - 127
COMP OUT 56 0 - 127
CAB SIM 57 0 - 127
MIX 58 0 - 127
X-MODE 13 0 - 127
When a parameter range is not linear its values are equally divided among the 128 steps of a Control Change
value.
To Next Page
Loading...
Need help?
General
