IKA C 2000 basic - Entering Simulation Parameters

([SHULPHQWVLPXODWLRQ
IKA

-WERKE C 2000 basic / control Ver. 04 08.07
3DJH
f
You must enter the following parameters:
&YDOXH The heat capacity of the calorimeter system
7HPS'LII The temperature difference to be used for the simulated
combustion
g
Confirm the dialog box with 2. You can post-process the simulated experiment in
the normal manner with the (YDOXDWLRQ dialog box (see Chapter 9 “Evaluation of
gross calorific value determinations”) or you can convert the result into the desired
reference state.
HQWHULQJVLPXODWLRQ
SDUDPHWHUV
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com