IKA ULTRA-TURRAX T 25 basic - Technical Data for Dispersion Tools and Properties

27
T25 1096EU
Dispersion tool Shaft Ø Stator Ø Rotor Rotor / Peripheral Recommended Available Final Supplied Comments
tube-Ø mm mm stator speed volume dispersion emulsion sealing
mm distance m/sec range
1)
µm fineness type
in mm ml
2)
µm S 25...
S 25 N – 8 G 8 8 6,1 0,25 7,7 0,3–5 10–50 1–10 N
S 25 N – 10 G 10 10 7,5 0,35 9,4 1–50 10–50 1–10 N
S 25 N – 10 G-VS 10 10 7,5 0,35 9,4 1–50 10–50 1–10 N with NS 14.5
metal polish
S 25.. – 18 G 18 18 12,7 0,3 15,9 10–5000 10–50 1–10 N, KR, KV
S 25-NK – 19 G 19 19 12,7 0,3 16,0 25–2000 5–25 1–50 N
S 25... – 25 G 18 25 17 0,5 21,3 50–2500 15–50 1–10 N, KR, KV
S 25 KV. – 25 G 18 25 17 0,5 21,3 50–2500 15–50 1–10 KV
S 25.. – 25 F 18 25 18 0,5 22,6 100–2000 5–25 1–50 N, KR, KV
S 25 KV – 25 G-IL 18 25 17 0,5 21,3 Inline 10–30 1–10 KV
‘
UTL 25 basic
S 25 KV – 25 F-IL 18 25 18 0,5 22,6 Inline 5-25 1–5 KV
‘
UTL 25 basic
Additional rotors
-- SR 18 -- -- 12,7 0,3 15,9 10-1500 10 - 30 1 - 10 for unraveling
– SR 25 – – 17 0,5 21,3 50–2500 10–30 1–10 for comminution
– RT 25 – – 17 0,5 21,3 100–2000 5–25 1–50 for emulsions
– SW 18 – – 12,8 0,35 15,9 10–500 f. viscous mater.
– SW 25 – – (G) 17 0,25 21,3 50–2500 f. viscous mater.
(F) 17 0,75
Assembly tools Included in delivery quantity
1)
Insofar as flow is around seal
2)
Applies to 200 mPa
•
s
Technical data dispersing tools and properties