BULB REPLACEMENT
High-mounted brake lamp (exterior)
High-mounted brake lamp bulb of S30
should be replaced as per the methods
described later.
It is recommended to have the H30/
H30 CROSS high-mounted brake
lamps (LED) replaced at Dongfeng
Franchise Store or IKCO authorized
representatives.
High-mounted brake lamp
(S30/interior) (W5W)
Press the clips at both ends to pull
outwards, and remove the housing.
Unscrew the mounting nuts and pull out
the plug, remove high-mounted brake
lamp assembly and dismantle the lamp
holder plate to replace the bulb. Reinstall
it in the reverse order.
License plate lamp
(W5W)
Open the trunk and remove its interior
trim, remove 4 nuts for mounting
decorative strip in the trunk lid and then
the decorative strip
of the trunk lid, lift
the lampshade gently from one end of
the lampshade with a slotted screwdriver,
and then remove the bulb for
replacement.
After replacing, reinstall it in the reverse
order.
To Next Page
Loading...
Need help?
General
