Headrest adjustment
Press the button beside the
headrest rod hole to adjust
the headrest to the
appropriate height which
can be achieved when the headrest
middle is level with the ear middle. To
remove the headrest, press this button
and lift the headrest up.
FRONT SEAT
Note:
Do not drive the vehicle without headrest.
Note:
Do not press the headrest downwards
directly without pressing down the
adjusting button, or else, the headrest
adjustment mechanism will be damaged.
Warning:
• For driving safety, adjust the front seat
when the vehicle is stopped.
• Do not drive the vehicle without
headrest.
Backrest inclination adjustment
Lift up the adjusting handle
to adjust the backrest
inclination appropriately.
Afterwards, press down the adjusting
handle and rotate the backrest back and
forth to lock the adjusting handle locking
mechanism.
Driver’s seat height adjustment*
Lift up the handle to raise
seat and press down the
handle to lower the seat
within a range of 40mm at
the most respectively.
Fore-and-aft adjustment
Lift up the control handle to
adjust the seat to desired
position. Then release the
handle and swing the seat
back and forth twice, until the locking
mechanism is conrmed to be locked
and the seat cannot be moved. The fore-
andaft adjustment range is 220mm at
the most.
To Next Page
Loading...
Need help?
General
