COMBINATION DISPLAY
Instrument panel luminance
adjustment
– Turn on the ignition switch (M position).
– Press down the function selector
button quickly to select the function of
odometer, trip meter and instrument
panel luminance adjustment.
– After selection, press down the
function selector button again within
3s to adjust the luminance, with the
grade of luminance regulated by each
pressing operation and the backlight
luminance changing circularly.
– The odometer display will be resumed
automatically 3 s after the luminance
adjustment.
The adjustment of luminance from high
intensity to low intensity is as shown
below:
Min. luminance
Luminance of 0-25%
Luminance of 25-50%
Luminance of 50-75%
Luminance of 75-100%
Max. luminance
Several minutes after the comfortable
instrument panel backlight luminance is
selected, the Zone B will display the total
mileage.
The adjusted instrument panel backlight
luminance is memorized and will be
displayed each time after the ignition
switch is turned on.
Warning:
It is strictly prohibited to adjust the
instrument panel luminance during
driving.
To Next Page
Loading...
Need help?
General
