Method of Zinc coating Electro-zinc and galvanised panels for repair
Kit contents
Kit ordering No. :DL 104001 (special order)
1 - Pad holder (AX) for 13 mm anode
1 - Pad holder (RSE) for 50 mm and 100 mm
anodes
5 - 13 mm anodes (X13L)
1 - 50 mm anode (50SP)
1 - 100 mm anode (100SP)
1 - Bag of 25 caps for 13 mm anodes
1 - Bag of 10 caps for 50 mm and 100 mm
anodes
3 - Litres of zinc solution (in 1 litre flasks)
1 - Plastic container (for transferring the zinc
solution)
1 - 12v generator (for connection to 220v supply)
1 - 3 m negative lead (black)
1 - 3 m positive lead (brown)
1 Adapter for 50 mm and 100 mm anodes
1 Preparing the surface
P280 SANDING of the damaged area (e.g. chip, blister,
repaired damage).
P400 finish SANDING.
Through DEGREASING (surface cleaning dilutant).
To Next Page
Loading...
Need help?
General
