Ikco SAMAND Service Manual

87
Samand
Adjustment and replacement
W78R249
1 9
20
22
2 1
W78R250
2 4
23
W78R251
MIG or torch plug weld:
19 The front of the front floor cross member,
20 The rear of the front floor cross member.
After re-assembly, brush on smooth mastic:
21 To the front floor/inner sill joint,
22 To the front floor/bulkhead joint.
Brush on smooth mastic:
23 To the bulkhead/side member centre part joint.
24 To the side member rear joint on the bulkhead
and on the inner sill.

Ikco SAMAND Specifications

General

Brand	Ikco
Model	SAMAND
Category	Automobile
Language	English