IKEA 605.153.03 - Page 6

EN
Tools you will need:
# 1 Phillips screwdriver
Pencil
Ruler or tape measure and
straight edge
Carpenter square
(optional)
Tin snips (for cutting
damper, if required)
Stud finder
or
Hammer (optional)
Gloves
Saw (saber, hole or keyhole)
Level
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Duct and masking tape
Electric drill with
3
⁄16“,
1
⁄2“ and
5
⁄8“
drill bits
Scissors
(to cut template, if necessary)
Safety goggles
5