IKEA Akurum kitchen - Tools Required for AKURUM Kitchen Installation

© Inter IKEA Systems B.V. 2004
The tools you’ll need
3
Hammer
Awl
Phillips screwdriver
Slotted screwdriver
Level (4 foot)
Carpenter´s rule or measuring tape
Rasp/File
Electric drill
- drill holes for handles,
wall fittings etc.
- assemble and install cabinets
Jig-saw - for sawing holes for
the sink and the extractor fan
Clamps
Right angle square
FIXA 35 mm hole cutter
- to drill extra holes for
the tap in the sink
(if necessary)
Mitre box with saw
- to ensure that you cut
the cornices at exactly
the right angle
Pencil
Fine-toothed handsaw
- for sawing worktops, plinths etc.
Adjustable wrench - to fasten wall
cabinets to the suspension rail, and
for cutting holes with the FIXA tool.