31
– A low setting adds less rinse aid
during the wash cycle and reduces
streaking on tableware.
– A higher setting adds more rinse
aid during the wash cycle, reduces
water marks and improves the
drying result.
5.
To save the settings, press
for 3 seconds.
Switching rinse aid system off
If you find the rinse aid refill indicator ir-
ritating, e.g. when using combined de-
tergents with a rinse aid component,
you can switch the rinse aid system off.
Tip:The function of rinse aid is limited
with combined detergents. You will
generally get better results using rinse
aid.
1.
Press .
2. To open the basic settings, press
for 3 seconds.
a The display shows H:xx.
a The display shows .
3.
Press repeatedly until the
display shows the value set at the
factory r:05.
4.
Press or repeatedly until the
display shows r:00.
5.
To save the settings, press
for 3 seconds.
a The rinse aid system is switched off
and the rinse aid refill indicator is de-
activated.
Detergent
Detergent
Find out which detergents are suitable
for your appliance.
Suitable detergents
Only use detergents that are suitable
for dishwashers. Both separate and
combined detergents are suitable.
For optimum washing and drying res-
ults, use separate detergent, adding
Special salt →Page28 and Rinse aid
→Page30 separately.
Modern, powerful detergents mainly
use a low-alkaline formulation with en-
zymes. Enzymes break down starch and
remove protein. Oxygen-based bleach-
ing agents are generally used to re-
move coloured marks, e.g. tea or
ketchup.
Note:Follow the manufacturer's in-
structions for each detergent.
DETERGENT DESCRIPTION
Tabs Tabs are suitable for
all cleaning functions
and do not need to be
measured out.
With shorter Pro-
grammes tabs some-
times do not dissolve
entirely and leave
residues of detergent.
This may impair the
cleaning effect.
Powder deter-
gent
Powder detergent is
recommended for
shorter Programmes.
The dosage can be ad-
justed to the level of
soiling.
To Next Page
Loading...
Need help?
General
