43
Cleaning spray arms
Limescale and soiling in the dishwash-
ing water may block the nozzles and
bearings on the spray arms. Clean the
spray arms regularly.
1.
Unscrew the upper spray arm and
pull down to remove .
2. Pull up the lower spray arm to re-
move.
3. Check the outlet nozzles on the spray
arms for blockages under running
water and remove any foreign bod-
ies.
4. Insert the lower spray arm.
a The spray arm clicks into position.
5. Insert the upper spray arm and
screw it firmly in place.
To Next Page
Loading...
