Heating func‐
tion
Application
Eco Fan
Cooking
This function is designed to
save energy during cook‐
ing. For the cooking instruc‐
tions refer to "Hints and
tips" chapter, Eco Fan Cook‐
ing. The oven door should
be closed during cooking so
that the function is not in‐
terrupted and to ensure
that the oven operates with
the highest energy ecien‐
cy possible. When you use
this function, the tempera‐
ture in the cavity may dier
from the set temperature.
The residual heat is
used.The heating power
may be reduced. For gener‐
al energy saving recom‐
mendations refer to "Ener‐
gy Eciency" chapter, Ener‐
gy Saving.This function was
used to comply with the en‐
ergy eciency class accord‐
ing to EN 60350-1. When
you use this function the
lamp automatically turns o
after 30 seconds.
Heating func‐
tion
Application
Light
To turn on the lamp without
a cooking function. It can be
used with residual heat in ‐
nal cooking phase to save
energy.
Setting a heating function
1. Turn the knob for the heating functions
to select a heating function.
2. Turn the control knob to select the
temperature. Press
to conrm.
The lamp turns on when the oven operates.
3. To turn o the oven, turn the knob for
the heating functions to the o position.
Turn the control knob to change the
temperature during cooking. Turn the knob
for the heating function to change a heating
function during cooking and press
to
conrm.
Heat-up indicator
When the oven function operates, the bars
in the display
appear one by one when
the temperature in the oven increases, and
disappear when it decreases.
Clock functions
Clock functions table
Clock function Application
TIME OF DAY
To show or change the
time of day. You can
change the time of day
only when the oven is o.
DURATION
To set how long the oven
works. Use only when a
heating function is set.
Clock function Application
END
To set when the oven
turns o. Use only when a
heating function is set.
TIME DELAY
Combination of DURA‐
TION and END function.
ENGLISH 12