Why is the salt indicator still on in my IKEA Dishwasher?
The salt indicator in your IKEA Dishwasher might remain on after refilling the salt container if you're using salt that dissolves slowly. If the indicator persists after 3 or 4 cycles, contact customer service. Note that this does not negatively affect the dishwasher's performance.
Why are the dishes still wet after the IKEA ENASTAENDE Dishwasher finishes?
If the dishes in your IKEA Dishwasher are wet after a cycle, consider the following potential causes: * The programme may be without a drying phase or with a low temperature drying phase. * The rinse aid dispenser might be empty. * The quality of the rinse aid could be a factor. * The quality of the combi detergent tablets may be the cause. In this case, try a different brand or activate the rinse aid dispenser and use rinse aid together with the combi detergent tablets.
General| Brand | IKEA |
|---|---|
| Model | ENASTAENDE |
| Category | Dishwasher |
| Language | English |
To Next Page
