7
Assembling the cabinets and frames
Before you start assembling the cabinets/frames, try
to set up a good work area that is safe and where you
make sure you have the recommended equipment/
tools close-by.
Sort the packages into groups to avoid confusion over
which pieces belong to the cabinet/frame assembly
and which belong to appliances, for example.
all cabinets/frames one by one and push them aside
until the time comes to install them. It’s helpful if
you arrange your cabinets in the order you will be
installing them. Use your packing list and drawing to
help you.
IMPORTANT
ENHET cabinets are supported by legs and can
be installed with or without a plinth, depending
on your personal preference.
See assembly instruction for info on how to
assemble the legs with or without plinths. If you
kitchen you will always need a extra leg installed
in the back of the last cabinet of the row.
To Next Page
Loading...
Need help?
General
