IKEA GRANSLOS - Using the Accessories

Setting and changing the time
After the first connection to the mains, wait
until the display shows
and "12:00".
"12" flashes.
1. Turn the knob for the temperature to set
the hours.
2. Press to confirm and set the minutes.
The display shows
and the set hour.
"00" flashes.
3. Turn the knob for the temperature to set
the current minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press again
and again until the indicator for the time of
day flashes in the display.
Setting the DURATION function
1. Set a heating function.
2. Press
again and again until starts
to flash.
3. Turn the knob for the temperature to set
the minutes and press to confirm.
Turn the knob for the temperature to set
the hours and press to confirm.
When the set Duration time ends the signal
sounds for 2 minutes. and time setting
flash in the display. The oven turns off
automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knobs to the off position.
Setting the END function
1. Set a heating function.
2. Press again and again until starts
to flash.
3. Turn the knob for the temperature to set
the hours and press to confirm. Turn
the knob for the temperature to set the
minutes and press to confirm.
At the set End time the signal sounds for 2
minutes. and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door
to stop the signal.
5. Turn the knobs to the off position.
Setting the TIME DELAY function
1. Set a heating function.
2. Press again and again until starts
to flash.
3. Turn the knob for the temperature to set
the minutes for DURATION time and
press to confirm. Turn the knob for
the temperature to set the hours for
DURATION time and press
to
confirm.
The display shows flashing .
4. Turn the knob for the temperature to set
the hours for END time and press to
confirm. Turn the knob for the
temperature to set the minutes for END
time and press
to confirm. The
display shows and the set
temperature.
Oven turns on automatically later on, works
for the set DURATION time and stops at the
set END time.
At the set END time the signal sounds for 2
minutes. and time setting flash in the
display. The oven turns off.
5. Press any button or open the oven door
to stop the signal.
6. Turn the knobs to the off position.
Setting the MINUTE MINDER
Minute minder can be both set when the
oven is turned on and off.
1. Press again and again until starts
to flash.
ENGLISH
15