IKEA NUTID Manual

ENGLISH 94
Whattodoif...
Problem Possiblecause Solution
The oven does not
work:
No electrical power supply. Verify the presence of mains
electrical power
The oven is not plugged into the
mains socket.
Connect the oven to the power
supply.
The selector knob is set to “0”. Turn the selector knob to select a
cooking function.
The selector knob is set to “
”.
Turn the selector knob to select a
cooking function.
The oven door is
locked and will
not release (Nutid
OV9 – Framtid
OV9 version)
Electrical malfunction due to
voltage uctuations.
Switch the oven off and then on
again to see if the fault has been
eliminated.
The oven door is
locked and will not
release (Framtid
OV5 – Datid OV7
version)
Electrical malfunction due to
voltage uctuations.
For Framtid OV5
- Set the function selector knob
to “0”.
- Set the timer to 5 min and
wait for the oven door to be
released.
For Datid OV7
- Set the function selector knob
to
F
.
- Set the clock to
(see
“Control panel”)
Wait 2 minutes for the door to be
released.
The electronic
programmer does
not work (Nutid
and Framtid OV9
version)
Electrical malfunction due to
voltage uctuations.
If the electronic programmer
(depending on the model) shows
“F HH”, contact the nearest After-
Sales Service.
Specify in this case the number
that follows the letter “F”.
Energy consumption with a standard load and pastry function Kwh

IKEA NUTID Specifications

General

Type	Built-in oven
Color	Stainless steel
Energy class	A
Voltage	220-240 V
Self-cleaning	Yes
Frequency	50 Hz