EN - 21
Save Power Mode
To activate or deactivate save power
mode,
follow the below steps:
1. Open the door and press Delay (4) and
Options (5) buttons simultaneously for 3
seconds.
2. After 3 seconds, the machine will
display last Setting, “IL1” or “IL0”.
3. When Save Power Mode is activated,
“IL1” will be displayed. On this mode,
interior lights will turn off 4 minutes after
the door is opened, and the machine will
turn off after 15 minutes of no activity in
order to save energy.
4. When Save Power Mode is deactivated
“IL0” will be displayed. If Save Power
Mode is deactive, interior lights will be
on as long as the door is open, and the
machine will always be on unless it is
turned off by user.
5. To save the selected setting, turn off
the machine.
In factory setting, Save Power Mode is
active.
Infoled 2.1 (Model Dependent)
LED Indicator State of the Machine
Red, continuous
The machine is running a
program.
Red, flashing A program is cancelled.
Red, flashing
rapidly
The machine has a fault.
Refer to section "Automatic
fault warnings and what to
do".
Green,
continuous
A program is finished.
To Next Page
Loading...
