GB - 24
9. TROUBLESHOOTING
FAULT POSSIBLE CAUSE TROUBLESHOOTING
The programme does
not start.
Your Dishwasher is not plugged in. Plug your Dishwasher in.
Your Dishwasher is not switched
on.
Switch your Dishwasher on by pressing
the On/Off button.
Fuse blown. Check your indoor fuses.
Water inlet tap is closed. Turn on the water inlet tap.
Your Dishwasher door is open. Close the Dishwasher door.
Water inlet hose and machine
filters are clogged.
Check the water inlet hose and machine
filters and make sure they are not
clogged.
Water remains inside
the machine.
Water drain hose is clogged or
twisted.
Check the drain hose, then either clean
or untwist it.
The filters are clogged. Clean the filters.
The programme is not finished
yet.
Wait until the programme is finished.
Machine stops during
washing.
Power failure. Check mains power.
Water inlet failure. Check water tap.
Shaking and hitting
noises are heard
during a wash
operation.
The spray arm is hitting the dishes
in the lower basket.
Move or remove items blocking the spray
arm.
To Next Page
Loading...
